Taurus Board is specifically designed to be used in the following domains:
Hardware:
Processor is an Atmel AT91SAM9263 based on ARM926EJ-S core and it runs at a speed
of 200MIPS at 180MHz.
SDRAM, which is a 64Mbyte 32 bit wide
NAND FLASH, which is a 64Mbyte 8 bit wide
SPI DATA FLASH, which is a 4Mbyte serial data flash
EEPROM which is a 64Kbyte TWI based EEPROM
One Serial Debug Port and one Serial COM port
One CAN Port
RJ-45 10/100Base-T Ethernet interface port with 3 status LED’s
USB V2.0 full speed or Low speed Host Port
USB V2.0 full speed Device Port
IrDA port supporting data transfer speed from 2.4Kbps to 115.2Kbps
TWI based Real Time Clock
Audio DAC Header.
Touch screen Controller and 40 Pin connector for interfacing TFT LCD
30 Pin connector for interfacing CMOS camera (Image Sensor Connector)
SD/MMC card connector
One 240 Pin Extended General Purpose I/O Connector
One 44 Pin 1.8” HDD Connector
3x3 Key Matrix
Six General purpose LED’s for user
One external interrupt Source with push Button
Reset Push Button
20 Pin standard JTAG interface for Debugging
Power Input DC 7.0V
Please send an email to us at sales@oasistechsol.com or call us at +91-20-64000203,
25661715 to get a quotation.
Software:
Drivers Supported:
USB Pen drive
Ethernet
Wi-Fi
Bluetooth
I2C
SPI
USB Printers, Keyboard, Mouse
MMC/SD Card Interface
RTC
USB based Webcams(Streaming, Capture & Snapshot)
Touch Screen
Parallel port Printer
TFT
Network Protocol(FTP,HTTP)